We supply standard-compliant materials and professional application for concrete repair, waterproofing, industrial floor coatings, FRP/Carbon wrap strengthening, as well as roof and façade rehabilitation. Suitable for factories, hospitals, malls, and residential projects.
Updated: 01/10/2025 • Page ID: PH-PPC-EN
Choosing the right system and workflow is key to a durable restoration. PPCWORLD advises by standards and real site conditions.
Polymer-modified mortars with high compressive strength and adhesion for column bases, beams, slabs, and water tanks. Thixotropic for vertical/sag-resistant areas; Flowable for form-and-pour.
PU foams to stop water instantly; Epoxy seals cracks for structural durability. For basements, tanks, lift pits.
Self-leveling, high-build, or antistatic systems for factories, pharma, and F&B. Includes crack, flatness, and moisture treatment prior to coating.
Increase flexural/shear capacity of beams and columns using carbon fabric with structural epoxy resins. Low-intrusion, minimal downtime.
Liquid-applied membranes, torch-on membranes, or TPO/EPDM for concrete and metal roofs. Butyl tapes & adhesives for joints and pipe penetrations.
Beauty + durability: lightweight cladding panels, pure acrylic/silicate coatings, treatment for hairline cracks and peeling.
Floor grinders, high-build airless sprayers, high-pressure injection pumps, two-part mixers, and industrial vacuums.
From survey – method design – supply – application – commissioning – warranty. Single point of contact for quality and schedule control.
Adapted to actual site conditions while preserving risk-control checkpoints.
Typical figures (reference only – request specific TDS per brand/product).
Products & Services
Concrete
Structural repair mortars (R3/R4)
Waterproofing
PU/Epoxy Injection – crack & leak treatment
Flooring
Epoxy/PU industrial floor systems
Strengthening
FRP / Carbon wrap
Roof
Roof waterproofing & recovery
Façade
Façade panels & coatings
Equipment
Restoration machines & tools
Service
EPC turnkey restoration
Technical Workflow
1) Survey & diagnosis – moisture tests, hammer tests, core drilling (if needed), current-condition report.
2) System selection – based on adhesion, strength, environment, and budget.
3) Mock-up & approval – on-site sample; clear acceptance criteria.
4) Application – follow TDS/SDS; site log & photo QC.
5) Handover & warranty – DFT/flatness checks, water tests, as-built dossier.
Note: For substrate moisture >4%, use a moisture barrier before coating.
Quick Specs
R4 repair mortar
Property
Reference value
Compressive strength, 28d
≥ 60 MPa
Elastic modulus
≥ 20 GPa
Adhesion to concrete
≥ 1.5 MPa
Shrinkage
< 0.5 mm/m
Floor coating systems
Item
Reference
Thickness
0.5–3.0 mm
Required substrate moisture
< 4% (or use moisture barrier)
Re-opening to traffic
24–72 h depending on system
FAQ
Do we need to shut down production lines during floor restoration?
We can phase the work and rotate lines. Some scopes allow quick re-opening in 24–48 hours.
Can carbon wrap replace additional concrete jacketing?
Not completely. Carbon wrap is suitable for localized strengthening with minimal intrusion when loads increase moderately or architecture must be preserved.
Is PU injection permanent?
PU stops water quickly; for long-term performance combine with epoxy crack sealing and source waterproofing.
